Kitchenaid-side-by-side-refrigerator-ice-maker-not-making-ice, kitchenaid refrigerator ice maker not working solution 1: freezer temperature is above 10 degrees f (-12c) if the freezer temperature is above 10 degrees fahrenheit (-12c), the ice maker will not produce ice cubes efficiently.. Do you have the correct water pressure? hollow or small ice cubes, along with slow or no water dispensing is likely due to low water pressure. connecting a refrigerator to a reverse-osmosis system could also lower the water pressure to the refrigerator, which will result in small ice cubes, low ice production or decrease amount of water being dispensed., kitchenaid refrigerator ksf26c6xyy00 ice maker not making ice ice maker not making ice is the 4th most common symptom for kitchenaid ksf26c6xyy00. it takes less than 15 minutes to fix on average. the instructions below from diyers like you make the repair simple and easy..
I have a kitchenaid side-by-side refrigerator. the icemaker is not working, and the light on the inside of the freezer on the upper right side is blinking red, where the icemaker on/off button is. the icemaker is turned on. i changed the water filter (i thought the filter might be the problem) but it's still not making any ice., kenmore, whirlpool, maytag french door refrigerator not cooling 596.76523500 and msd2650heq - duration: 37:58. diy repairs now 121,275 views.
Kitchenaid ice maker not making ice sometimes the solder will release the heating coil from the bottom of the ice tray and not permit the ice to release from the tray. you will have to check the coil to see if it is firmly attached to the bottom of the ice tray. however, before you do this make sure the ice maker is in the off position., ask your own appliance question customer: replied5 years ago. also the bucket seems to freeze to the turning gear and will not release to be removed and thus will continue to spit out until the bucket is empty..
If you’ve got a kitchenaid (or whirlpool, or kenmore) fridge with an ice maker that’s not making ice, don’t call the repairman. this is a very easy (and relatively inexpensive) fix that you can totally do yourself.